@opaqueapple
@opaqueapple
Earth
Activity Feed
@opaqueapple
Hi all, I finished another figure drawing. Since i got recommended to do a value comp to figure out initial values, i did a quick sketch of the figure (1st image) - I dont exactly know if i approached it like a 'value comp'. the second image is my final. This is my final figure drawing for this course specifically! The course was a lot of fun & I learned a ton. Thanks to all the people who kindly gave me critiques & Pushed me just that bit more to improve & Thanks Proko for putting this course together :D As far as that, Any critiques as usual would be much appreciated, Thanks!
Dwight
2yr
Hey Apple, not really a shading critique because I like your shading, but I really think you should spend a bit more time on proportion. Trust me, proportion is my least favorite part of drawing, but it really makes your drawing feel more cohesive if done correctly. In most drawings I do, about one 1/3 of my time spent is just on proportion because of it's importance (and my lack of intuitive proportion). Now there's a ton of ways to measure proportion, and many videos are here on Proko about it, so I won't relate what I do here (unless you'd like me to). A good exercise is to compare your reference to your drawing and see what things you tend to make bigger or smaller, and remember that next time you go into a longer drawing. But yeah, in case you forgot, I've been following you for a bit because I really like seeing your progress, and I hope you'll continue to grow as fast as you are now. - Dwight
@opaqueapple
Hi all, I ended up finishing another Figure Drawing & tried to apply whatever i learnt with the master study of Stan's own work. I think @mrfrar you mentioned to start off with 6 values or less in my last one, I'm pretty sure this is more than 6. I found it difficult to simplify down to 6 values as simple as it sounded. If you see this & you don't mind, would you send an example of a figure drawing minimized to 6 values so I could use it as reference for my next? Beside from that, Any feedback would be much appreciated as usual! I'm planning on finishing 1 more for this course before i move on.
John Harper
You may need more contrast between your background color and what your model. On that topic, sometimes we define edges with shading and other times with line. You can do some really interesting things using both methods. Good try.
André Machado
Hello. The shading on this one looks much more clearer and readable. If you want a figure with only 6 values, the figure drawing demo of Yoni from Stan applies this principle. If you want more of a challenge, you could try to replicate one of Michael Angelo's anatomy studies. It's a very complex drawing but the shading is only reduced to 5 values. I've attached it to the post. Something that might also help is doing a compositional study where you just do a quick drawing of the figure but with the flat values and assign the 5 of them to the figure before starting the real drawing (2 for the shadows, 3 or 4 to the lights). Try to make the core shadow darker than the reflected light. You did this well on the leg but on the torso it's much less noticeable. This is optional but another thing that I like to do is hatching to give it some texture. For example, I would do some hatching surrounding the leg near the core shadow to better represent the cylindrical form of the leg. As for the general form and gesture its pretty good. The only thing is the breast shape is a bit different from the reference. In the reference is more elongated but in yours it has a more rounder shape. Not that big of a deal tbh.
@opaqueapple
Hi all, i ended up doing a study of Stan's own approach to figure drawing. I'll do 1 or 2 more figure drawings just to apply what I've learnt before i wrap this course up!
klaibee
11mo
Great work!
@opaqueapple
Hey all, I finished this section of shading a figure drawing, Any critiques would be much appreciated. Thanks!
André Machado
The reference you used has soft lighting but you made your shadows too confusing. Dont overcomplicate the shadow family and make it compete with the light family. If you do, there's no harmony to the figure. For example in the legs, you have a mixture of shadow tones and half tones and this breaks the shading. For the shadows just use two tones for the start (one for the core shadow and other for the reflected light) and also dark cast shadows when the surface is covered by something. The rule is the lightest dark is always darker than the darkest halftone. It's hard to keep this in mind but this must apply throughout the entire drawing. I usually take a few breaks when shading to keep my mind clear because it can get tiring if you shade for hours straight. There are also some lines that seem unnecessary like the one between the shoulders near the spine and the other one the butt. Those sharp lines hurt your drawing so avoid them as much as possible unless it's absolutely necessary to indicate a sharp turn. Always start by separating light and shadow with a single line (the terminator) variating between soft and hard edges observing the reference. In this case, it's mostly just soft edges. Make sure the shadow family has less details and focus more on the light family. You need to make a plane get lighter in the center (center light) with the highlights (if there's one) and that light slowly fades has it goes away from the center (halftones) If you're just starting with shading, I recommend you use fewer values (5 to 6) just to master the fundamental concepts, then you slowly build up details by increasing the value range. The form, gesture, proportions look pretty good.
@opaqueapple
Hi all, I did some exercises from the 'How to Hold & Control your pencil' Section. Critiques are welcomed as usual
@opaqueapple
Hi everyone, I did some shading on eggs as the exercise for this section; The first page i initially ended up taking the pictures for which i used as reference. the order which they are uploaded by should go by order of the number on the page. As for the second page, i unfortunately didnt take any reference photos. Any Critiques would be much appreciated!
Jesper Axelsson
Hi @opaqueapple, nice studies! I think the core shadows are really nice! - I think the values in the shadow are getting to close to the values in the light, which diminishes the feeling of form.  As a rule of thumb 'the lightest dark should be darker than the darkest light'. You might appreciate this video Mind-Blowing Realistic Shading Tricks. If you want to learn more about values, you can access the How to Organize Values lesson for free through the Proko Course Sampler. Hope this helps :)
Marco Sordi
2022/9/28. Good morning everybody. Here’s my daily 30 mins exercise. Snake body is a good reference to improve my capability to recognize in the animal body simple polygons like cubes, cylinders and pyramids. It’s body sections also commutes from square to round and it’s very funny follow the soft gesture of this kind of reptiles. This was supposed to be an exercise about structure. But in the end I couldn’t help my self from adding some simple shadows. Thanks for any comment or advice.
@opaqueapple
This is great! love the way you represented the forms!
@opaqueapple
Hi all, I finished some Observational studies applying the measuring techniques; The first set of 5 is just the figures themselves. The other half are my notes. Any Critiques would be much appreciated, thanks!
John Harper
That is an awesome practice. I'm gunna start doing it as well. I do most of my stuff non-digital so I will have to use tracing paper.
@opaqueapple
Hi all, I finished some Loomis Proportion Studies; The first three are using reference, the last 3 are recall. Any feedback would be much appreciated, Thanks!
@opaqueapple
Hi everyone, I finished some Beverly Hale cranial unit studies, any critiques would be much appreciated. The final 3 are from recalling. Have a good week everyone!
Alexis Saldivar
These are a little hard to see but they're fairly decent. Watch your proportions. On some of them I notice stuff like the rib cage being too large or the femur being to short.
Help!
Browse the FAQs or our more detailed Documentation. If you still need help or to contact us for any reason, drop us a line and we’ll get back to you as soon as possible!